Skip to content

Runway Incursions: Causes and How They Are Prevented

By admin /

The runway is the most critical area of any airport: aircraft move there at more than 250 km/h, and there is little time to react. ICAO defines a runway incursion as any occurrence at an aerodrome involving the incorrect presence of an aircraft, vehicle or person on the protected area of a surface designated for the landing and take-off of aircraft.

Why it matters

The deadliest accident in aviation history, at Tenerife in 1977, was a runway collision between two Boeing 747s in fog. More recently, in January 2024, a Japan Airlines Airbus A350 collided with a Coast Guard aircraft on the runway at Tokyo Haneda. Runway safety is a top priority for ICAO, regulators and airports worldwide.

Main causes

  • Pilot deviations – entering or crossing a runway without clearance, often after misunderstanding an instruction, losing position awareness on a complex taxiway layout, or being distracted.
  • ATC errors – clearing an aircraft onto a runway that is occupied, or forgetting a vehicle or aircraft already on it.
  • Vehicle and pedestrian deviations – airport vehicles or workers entering the runway without permission.
  • Communication problems – similar call signs, blocked transmissions, non-standard phraseology or language difficulties.
  • Airport design – confusing intersections ("hot spots") where errors happen repeatedly.

Defences against runway incursions

Markings and signs

  • Runway-holding position markings – two solid and two dashed yellow lines across the taxiway; aircraft must stop on the solid side until cleared.
  • Mandatory instruction signs – white text on a red background showing the runway designation at holding points.
  • Enhanced taxiway centreline markings that warn pilots they are approaching a holding position.

Lights

  • Stop bars – a row of red lights across the taxiway, switched off by ATC only when the aircraft is cleared.
  • Runway guard lights – flashing yellow lights at holding positions.

Procedures and communication

  • Standard phraseology and full read-back of all runway instructions: line up, cross, hold short, take off and land.
  • Always asking for clarification when unsure – "say again" is never wrong.
  • A sterile cockpit during taxi, with airport charts out and hot spots briefed.
  • Vehicle drivers on the airside trained and authorised, in radio contact with the tower when on the manoeuvring area.
  • Runway safety teams at each airport that review events and fix local problems.

Technology

Surface movement radar, advanced surface movement guidance and control systems (A-SMGCS) and runway incursion alerting give controllers a picture of everything on the airfield, even in fog. Some airports add runway status lights that turn red automatically when it is unsafe to enter.

Test yourself: the free aviation skill test has unit-wise questions for every BBA, BSc and MBA aviation subject, and you can try flying in your browser with the free Dr. M.G.R. Flight Simulator.

Frequently asked questions

What is a runway incursion?

Any occurrence at an aerodrome involving the incorrect presence of an aircraft, vehicle or person on the protected area of a surface designated for the landing and take-off of aircraft.

What do the yellow lines at a runway holding point mean?

Two solid and two dashed yellow lines mark the runway-holding position; aircraft and vehicles on the solid-line side must stop until cleared to enter or cross the runway.

What is a stop bar?

A row of red in-pavement lights across a taxiway at a holding position. ATC switches it off only when the aircraft is cleared to proceed.

What is a hot spot on an airport chart?

A location with a history or potential risk of collision or runway incursion, where pilots and drivers need extra attention.