Skip to content

How to Read METAR and TAF: Aviation Weather Reports Decoded

By admin /

Every flight begins with a weather check, and pilots, dispatchers and air traffic controllers all read the same two coded reports: the METAR (the weather now at an airport) and the TAF (the forecast for that airport). They look like a string of random letters at first, but the format is standardised worldwide by ICAO and the World Meteorological Organization, so once you learn it you can read the weather at Chennai, Dubai or London the same way.

What is a METAR?

A METAR is a routine aerodrome weather report. At busy airports it is usually issued every 30 minutes (some airports report hourly), and a special report called a SPECI is issued when conditions change significantly between routine reports.

Here is a typical example for Chennai International Airport:

METAR VOMM 300530Z 24008KT 6000 FEW020 SCT100 31/24 Q1008 NOSIG

Decoding the METAR group by group

  • VOMM – the ICAO airport code (Chennai). Indian codes start with V: VA (west), VE (east), VI (north) and VO (south).
  • 300530Z – day 30 of the month, 05:30 UTC (Z = Zulu = UTC). Add 5 hours 30 minutes for Indian Standard Time, so this is 11:00 IST.
  • 24008KT – wind from 240° true at 8 knots. A gust is shown with G, for example 24015G25KT; VRB03KT means light and variable; 00000KT means calm.
  • 6000 – prevailing visibility of 6,000 metres. 9999 means 10 km or more.
  • FEW020 SCT100 – cloud cover in eighths of the sky (oktas) and base height in hundreds of feet: FEW = 1–2 oktas at 2,000 ft, SCT (scattered) = 3–4 oktas at 10,000 ft. BKN (broken) is 5–7 oktas and OVC (overcast) is 8 oktas. CB (cumulonimbus) or TCU (towering cumulus) is added after the height when present, e.g. FEW015CB.
  • 31/24 – temperature 31 °C and dew point 24 °C. A minus sign is written as M, e.g. M02. When the two numbers are close, expect mist or fog.
  • Q1008 – QNH 1008 hPa, the pressure setting that makes the altimeter read the airport's elevation on the ground.
  • NOSIG – no significant change expected in the next two hours (the trend forecast).

Weather codes you will see often

Present weather is written with a short code, an optional intensity sign (- light, + heavy) and descriptors:

  • RA rain, DZ drizzle, SH showers (e.g. SHRA), TS thunderstorm (e.g. TSRA).
  • BR mist (visibility 1,000–5,000 m), FG fog (below 1,000 m), HZ haze – common over north Indian airports in winter.
  • VC in the vicinity, e.g. VCTS = thunderstorm near but not at the airport.

CAVOK ("cav-oh-kay") replaces visibility, weather and cloud when visibility is 10 km or more, there is no cloud below 5,000 ft (or the highest minimum sector altitude, if higher), no CB or TCU, and no significant weather.

What is a TAF?

A TAF (Terminal Aerodrome Forecast) uses the same building blocks but describes the expected weather over a validity period, typically 9 to 30 hours. Example:

TAF VOMM 300500Z 3006/3112 24010KT 6000 SCT020 TEMPO 3010/3014 3000 TSRA FEW015CB BECMG 3018/3020 VRB03KT

  • 300500Z – issued on the 30th at 05:00 UTC.
  • 3006/3112 – valid from the 30th 06:00 UTC to the 31st 12:00 UTC.
  • 24010KT 6000 SCT020 – the main forecast conditions.
  • TEMPO 3010/3014 3000 TSRA FEW015CB – temporarily between 10:00 and 14:00 UTC, visibility 3,000 m in thunderstorm with rain and CB cloud at 1,500 ft. TEMPO changes last less than an hour each time and cover less than half of the period.
  • BECMG 3018/3020 VRB03KT – becoming light and variable wind between 18:00 and 20:00 UTC, and staying that way.
  • PROB30 / PROB40 – a 30% or 40% probability of the condition that follows.

Why this matters in the job

Pilots use METARs and TAFs to decide whether they can depart, which runway is likely in use, and whether they need an alternate airport and extra fuel. Flight dispatchers build the same decisions into the flight plan, and airport operations teams use them to prepare for thunderstorms, low visibility procedures or a change of runway. That is why weather decoding is part of DGCA meteorology for pilots and part of the operations subjects in aviation management degrees.

Practice: decode this

METAR VIDP 150030Z 00000KT 0400 FG VV002 12/12 Q1018 BECMG 0800

Answer: Delhi, 15th at 00:30 UTC, calm wind, visibility 400 m in fog, sky obscured with vertical visibility 200 ft, temperature and dew point both 12 °C, QNH 1018 hPa, visibility becoming 800 m. A classic winter fog morning – the kind that triggers low visibility procedures and CAT III approaches.

Test yourself: the free aviation skill test has unit-wise questions for every BBA, BSc and MBA aviation subject, and you can try flying in your browser with the free Dr. M.G.R. Flight Simulator.

Frequently asked questions

What is the difference between METAR and TAF?

A METAR reports the observed weather at an airport at a given time; a TAF forecasts the expected weather at that airport over a validity period, usually 9 to 30 hours.

Are METAR times in IST?

No. METAR and TAF times are always in UTC (Z). Add 5 hours 30 minutes to convert to Indian Standard Time.

What does CAVOK mean?

Ceiling and visibility OK: visibility 10 km or more, no cloud below 5,000 ft or the highest minimum sector altitude, no CB or TCU, and no significant weather.

Where can I read live METARs for Indian airports?

The India Meteorological Department publishes aviation weather for Indian airports, and flight-planning services also show live METARs and TAFs.