An airliner earns money only when it flies, so the time it spends on the ground between two flights – the turnaround – is planned to the minute. A low-cost narrow-body can turn around in about 25–35 minutes; a wide-body on a long-haul flight may need 90 minutes or more. Dozens of people from different companies work around the aircraft at the same time.
Step by step
- Arrival on stand – the aircraft is guided in by visual docking guidance or a marshaller. Once the engines are shut down and the anti-collision beacon is off, chocks and cones go in.
- Power and air – ground power and pre-conditioned air are connected, so the APU can be switched off.
- Doors open – the aerobridge or steps are positioned and passengers deboard.
- Baggage and cargo offload – holds are opened and bags go to the arrivals belt; transfer bags go to their connecting flights.
- Cabin cleaning and catering – cleaners prepare the cabin; catering trucks exchange trolleys at the galley doors.
- Fuelling – the fuel order comes from the flight plan. If passengers are on board during fuelling, extra safety precautions apply, such as manned doors and cabin crew ready for evacuation.
- Water and toilet service.
- Technical checks – a pilot or engineer carries out the walk-around inspection, and any defects are dealt with.
- Loading – outbound baggage and cargo are loaded according to the load plan.
- Boarding – passengers board, the final figures go to load control, and the loadsheet is issued to the captain.
- Departure – doors close, the bridge is removed, the tug connects and the aircraft pushes back.
The critical path
Some activities depend on others: boarding cannot start until cleaning is done, and loading cannot finish until offloading has. The longest chain of dependent tasks is the critical path; any delay on it delays the flight. Turnaround coordinators watch it closely.
Who coordinates it
A turnaround coordinator or ramp supervisor manages the turnaround for the airline or ground handler, working with load control, the operations control centre and the airport. Many Indian airports use Airport Collaborative Decision Making (A-CDM), where airlines, handlers, the airport and ATC share milestones such as the Target Off-Block Time (TOBT) so that pushback and start-up can be planned precisely.
Why turnaround performance matters
- On-time performance and passenger satisfaction.
- Aircraft utilisation – more flights per day from the same aircraft.
- Safety – most ground damage happens when people are rushed.
Test yourself: the free aviation skill test has unit-wise questions for every BBA, BSc and MBA aviation subject, and you can try flying in your browser with the free Dr. M.G.R. Flight Simulator.
Frequently asked questions
How long does an aircraft turnaround take?
Typically about 25–35 minutes for a low-cost narrow-body and 60–90 minutes or more for a wide-body on a long-haul flight.
Who manages the turnaround?
A turnaround coordinator or ramp supervisor from the airline or ground handler, working with load control, operations and the airport.
What is the critical path in a turnaround?
The longest chain of tasks that depend on each other; a delay to any task on it delays the departure.
What is TOBT?
Target Off-Block Time, the time the airline or handler expects the aircraft to be ready for pushback, shared with the airport and ATC under A-CDM.
