Skip to content

Ground Support Equipment (GSE) at Airports: Types and Uses

By admin /

Watch an aircraft during a turnaround and you will see a small fleet arrive within minutes: tugs, loaders, buses, fuel and catering trucks. Together they are called ground support equipment (GSE), and knowing what each machine does – and how it is driven safely around an aircraft – is basic knowledge for anyone in airport and ground operations.

Moving the aircraft

  • Pushback tug – pushes the aircraft back from the stand, because jets cannot reverse under their own power at the gate. Conventional tugs use a towbar attached to the nose gear; towbarless tugs cradle the nose wheel instead.
  • Towing tractors – also move aircraft between stands, hangars and maintenance areas, with engines off.

Power and air

  • Ground Power Unit (GPU) – supplies 115 V, 400 Hz AC power to the aircraft on the stand so it does not need to run its APU (auxiliary power unit). Many stands have fixed power on the boarding bridge.
  • Pre-conditioned Air (PCA) unit – blows cooled or heated air into the cabin through a hose, which saves fuel and noise compared with running the APU – very useful in Indian summers.
  • Air Start Unit (ASU) – provides compressed air to start the engines when the APU is not available.

Baggage and cargo

  • Belt loader – a moving conveyor that carries bags and loose cargo up into the bulk hold of narrow-body aircraft.
  • Container/pallet loader (high loader) – lifts ULD containers and pallets to the main deck or lower-deck doors of wide-body and freighter aircraft.
  • Baggage tractors and dollies/carts – tow trains of baggage carts and ULD dollies between the baggage hall and the aircraft.

Passengers

  • Passenger steps – self-propelled or towed stairs for remote stands.
  • Apron buses – carry passengers between the terminal and remote stands.
  • Ambulift – a high-lift vehicle with a cabin that boards passengers with reduced mobility directly at the aircraft door.

Servicing

  • Catering high-lift truck – raises its body to the galley door to swap trolleys.
  • Potable water truck and lavatory service truck – refill drinking water and empty the toilet tanks.
  • Fuel bowser (refueller) or hydrant dispenser – refuellers carry fuel in a tank; at airports with a hydrant system, a dispenser connects an underground fuel pit to the aircraft.
  • Chocks and cones – simple but essential: chocks stop the wheels moving and cones mark the aircraft's wingtips, engines and tail.

Using GSE safely

Most ramp damage happens at low speed, when equipment touches an aircraft. Airports and ground handlers therefore set strict rules: vehicles wait outside the equipment restraint area until the aircraft has stopped, the anti-collision beacon is off and chocks are in; low speed limits apply on the apron and lower still near aircraft; equipment approaches the aircraft only with a guide person where required, and brake checks are done before reaching the fuselage. Foreign object debris (FOD) checks keep loose items away from engines.

The shift to electric GSE

Airports around the world, including in India, are moving to electric tugs, belt loaders and buses to cut fuel use, emissions and noise on the apron. Fixed ground power and pre-conditioned air at gates also reduce APU running – part of the wider push to make airports greener.

Careers around GSE

GSE is operated by ramp agents and equipment operators, maintained by GSE engineers and technicians, and planned by ground operations supervisors and managers. Airport and aviation management students learn how equipment planning affects turnaround time, safety and cost – the core of airport ground operations.

Test yourself: the free aviation skill test has unit-wise questions for every BBA, BSc and MBA aviation subject, and you can try flying in your browser with the free Dr. M.G.R. Flight Simulator.

Frequently asked questions

What is GSE in aviation?

Ground support equipment is the vehicles and machines that service an aircraft on the ground, such as pushback tugs, ground power units, loaders, buses, fuel and catering trucks.

Why do aircraft need a pushback tug?

Jet aircraft cannot safely reverse under their own power at a gate, so a tug pushes them back from the stand to a point where they can taxi forward.

What does a GPU do?

A ground power unit supplies electrical power (usually 115 V, 400 Hz AC) to the aircraft on the stand so that it does not have to run its auxiliary power unit.

Who operates ground support equipment?

Trained ramp agents and equipment operators employed by airlines, ground-handling companies or airports, each authorised for the equipment they drive.