Every airliner follows an approved maintenance programme based on flight hours, flight cycles (take-offs and landings) and calendar time. Tasks range from a quick walk-around before each flight to a heavy check where the aircraft is taken apart in a hangar for weeks. Exact intervals depend on the aircraft type and the operator's approved programme.
Line maintenance
- Transit / pre-flight checks – done between flights: a walk-around for obvious damage, tyre and brake condition, leaks and fluid levels.
- Daily checks – a more detailed inspection, usually overnight.
- Weekly checks on some types.
Line maintenance also deals with defects reported by pilots in the technical log.
A check
The lightest scheduled check, typically every few hundred flight hours or a couple of months, done overnight on the line or in a hangar. It covers general inspection, lubrication, filter changes, and checks of emergency equipment and systems.
C check
A much more thorough check, typically every one and a half to two years. The aircraft is in a hangar for one to two weeks or more while panels are opened, structures and systems are inspected in detail, and components are replaced.
D check (heavy maintenance visit)
The most comprehensive check, roughly every six to ten years. The aircraft is largely stripped down – interiors removed, paint sometimes stripped – to inspect the structure for fatigue and corrosion. It can take several weeks and cost millions of dollars, so airlines plan these visits years in advance.
Modern maintenance programmes, developed with the MSG-3 method, group individual tasks by interval rather than strictly by letter check, but the A, C and D terms are still widely used.
Other maintenance
- Engine shop visits – engines are removed and overhauled based on their own limits.
- Component overhaul – landing gear, APUs and avionics have their own life limits.
- Airworthiness directives – mandatory inspections or modifications issued by regulators when a safety issue is found.
MRO and careers in India
Maintenance is carried out by approved maintenance organisations (DGCA CAR-145) – either the airline's own engineering department or independent MRO (maintenance, repair and overhaul) companies. Work is certified by licensed Aircraft Maintenance Engineers (AMEs), licensed by DGCA in categories such as B1 (mechanical) and B2 (avionics). With India's fleet growing fast, MRO capacity – and demand for engineers, planners, quality and stores staff – is growing too. Maintenance planning and reliability roles also suit aviation management graduates.
Test yourself: the free aviation skill test has unit-wise questions for every BBA, BSc and MBA aviation subject, and you can try flying in your browser with the free Dr. M.G.R. Flight Simulator.
Frequently asked questions
What is the difference between an A check and a C check?
An A check is a light, frequent check done overnight; a C check is a detailed check every one to two years that keeps the aircraft in a hangar for one to two weeks or more.
What is a D check?
The heaviest maintenance visit, roughly every six to ten years, where the aircraft is largely stripped down to inspect its structure.
What does MRO stand for?
Maintenance, repair and overhaul – the organisations and industry that maintain aircraft, engines and components.
Who certifies aircraft maintenance in India?
DGCA-licensed Aircraft Maintenance Engineers working in DGCA-approved maintenance organisations.
