"How fast is the aircraft going?" has three different answers, and pilots use all three.
Indicated airspeed (IAS)
The speed shown on the airspeed indicator. It comes from the pressure of air hitting the pitot tube. IAS is what the wing "feels", so pilots use it for take-off, landing and stall speeds.
True airspeed (TAS)
The aircraft's real speed through the air. As the aircraft climbs, the air gets thinner, so the airspeed indicator reads lower than the true speed. A handy rule of thumb: TAS is about 2% higher than IAS for every 1,000 ft of altitude (for moderate heights).
Example: IAS 250 kt at 10,000 ft gives TAS of roughly 250 + 20% = about 300 kt.
Groundspeed (GS)
The speed over the ground: TAS adjusted for wind.
- Headwind lowers groundspeed.
- Tailwind raises it.
Example: TAS 450 kt with a 50 kt tailwind gives groundspeed 500 kt.
Why all three matter
- IAS for flying the aircraft safely.
- TAS for navigation and performance.
- Groundspeed for arrival times and fuel planning.
At high altitude
Airliners in the cruise also watch their Mach number, the speed compared with the speed of sound.
Learn more at Dr. M.G.R.
Frequently asked questions
Why does IAS read less than TAS at height?
The air is thinner, so less pressure enters the pitot tube for the same true speed.
Which speed decides arrival time?
Groundspeed, because it is the speed over the ground.
