An airliner's tyres carry the whole aircraft at landing speeds of well over 200 km/h, and then sit still in hot or freezing weather. They are among the toughest tyres made.
Built for heavy loads
Aircraft tyres are inflated to high pressures, much higher than car tyres, and built with many layers of strong fabric and rubber.
Why nitrogen
- Dry: nitrogen contains no water vapour, which in air can turn to ice at altitude or steam when brakes get hot.
- Stable pressure: nitrogen pressure changes less with temperature.
- Safer: without oxygen, there is less risk of fire if hot brakes heat the tyre.
- Less corrosion of the wheel.
Heat
Braking after landing makes the brakes extremely hot. Wheels have fusible plugs that melt and release pressure if the wheel gets too hot, to stop the tyre from bursting.
Wear and change
Landing and braking wear the tread. Tyres are changed after a set number of landings or when the tread is worn; many can be retreaded several times.
Daily checks
Engineers check pressure, look for cuts, bulges and wear, and remove any foreign objects. A small cut can be dangerous at high speed, which is why keeping the apron and runway free of debris matters so much.
Learn more at Dr. M.G.R.
Frequently asked questions
Why are aircraft tyres filled with nitrogen?
Nitrogen is dry and inert, so pressure stays more stable and there is less risk of fire and corrosion.
What is a fusible plug?
A plug in the wheel that melts if the wheel overheats, releasing pressure before the tyre can burst.
